Stainless Steel 317L Sheet / Plate Supplier & Manufacturer
Dimension and wall thickness
Pipe diameters
Stainless Steel 317L Plates, SS Werkstoff No 1.4438 Sheets, 317L Stainless Steel 2B Plate Stockist, SS 317L Sheets, SS Grade 317L Polished Plates Manufacturer, SS 317L Coils, SUS 317L Sheets Plates, Stainless Steel 317L Slatting Coil, SS 317L Circle, SUS 317L Plate, SS 317L Plate Cut To Size, SS S31703 Strips Stockist, Stainless Steel 317L Sheet & Plate Exporter in India..
ASTM A240 Stainless Steel 317L Shim Sheets, 317L Stainless Steel CR Sheet, Supplier Of ASME SA240 Stainless Steel 317L Coils, SS UNS S31703 Plates, Stainless Steel Plates, SS WERKSTOFF NR 1.4438 Sheets, Stainless Steel 317L Cold Rolled Plates, 317L Stainless Steel HR Sheets Dealer, SS UNS S31703 Plates, 317L Stainless Steel Hot Rolled Plates Supplier in Mumbai, India.
SS 317L Plates, Suppliers of Stainless Steel 317L Sheets, Stainless Steel S31703 Sheets, SS 317L Hot Rolled Plate, AISI 317L Plate, ASME SA 240 317L SS Sheets, Stainless Steel 317L Circle, SS DIN 1.4438 Plate, 317L SS Chequered Plate Exporter, SS 317L Perforated Sheets, ASTM A240 Stainless Steel 317L Plate, 317L Stainless Steel Cold Rolled Plates, SS 317L Industrial Sheets and Plates Manufacturers.
Detailed Information
Supplier & Manufacturer of Stainless Steel 317L Sheet / Plate
SS 317L Plate contains about 4-30% of chromium. UNS S31703 Plates are classified into austenitic, martensitic, and ferritic steels based on their crystalline structure. ASTM A240 Grade 317L stainless steel sheet is a modified version of 316 stainless steel. ASTM A240 Type 317L Plate is tougher than 304 stainless steel. SS 317L Plate is recommended to use chip breakers. Stainless Steel 317L Sheets also offers good electrical and thermal conductivity, as well as having the ability to be a superconductor. Stainless Steel 317L Coils is essentially non-magnetic in the annealed condition and can only be hardened by cold working.
Stainless Steel 317L Plates also has excellent mechanical properties and is a tough, ductile alloy suitable for heavy–duty structural parts.
Hardenability of these WNR 1.4438 Plate will be reduced if constant feeds and low speeds are used. 317L stainless steel plate can be welded using resistance and fusion methods. The oxyacetylene welding method is not preferred for these 317L SS Sheets. SA 240 Tp 317L Sheet does not respond to heat treatment. Arc or gas welding is generally not recommended, although SS 317L Plates may be spot, seam or flash welded. Compared to regular steel, SS 317L Coils do not easily corrode, stain, or oxidize / rust.
These Stainless Steel 317L Plates / Sheets find their applications in various industries such as gas processing industries, petrochemical industries, food processing industries, oil & gas industries, fertilizers industries, sugar industries, sugar industries, power generation industries, etc. Our huge inventory has a ready stock of ASTM A240 TP317, SS 317L Clad Plates, SS 317L 2B Plate, SS 317L Diamond Plate, SS 317L Checker Plate, SS 317L Hot Rolled Plate, SS 317L Cold Rolled Plate, Stainless Steel 317L Tread Plate, Stainless Steel 317L Clad Plate. Our Stainless Steel 317L Sheet/Plates are tested and examined by industrial experts to ensure high standard quality, creek, or damages before supplying them to our clients. We perform a number of tests on our plates, coils, and sheets to ensure high standard quality. The tests conducted eddy current testing, hydrostatic testing or ultrasonic examination, NDT, and also chemical and physical property inspection. Some of the other tests are chemical analysis, Mechanical test, Rockwell hardness test, chemical test, intergranular corrosion test, positive material test, flattening test, flaring test, and third-party inspection, and so on.
The use of a higher alloyed filler metal like 317L Stainless Steel Plates can be necessary due to the cast structure of the weld metal. The high-temperature oxidation resistance of 317 Stainless Steel Coils is helpful to 1500 Degree F. SS 317L Sheets is additionally utilized for weighty welded gatherings which can’t be toughened in the wake of welding or where the working conditions cause openness inside the temperature scope of 426.67 Degree F to 815.55 Degree F. Hardened Steel 317L Plates is suggested for parts manufactured by welding which can’t be in this way tempered or for parts which should work in assistance of 800 Degree – 1600 Degree F. SS 317L sheet has restricted cobalt and tantalum content for nuclear applications. Cold work will cause an increase in both strength and hardness Alloy 317L Plate is a higher chromium, nickel, and molybdenum version.
Cities We Delivered
New York City, Los Angeles, Chicago, Houston, Phoenix, Philadelphia, San Antonio, San Diego, Dallas, San Jose, Austin, Jacksonville, Fort Worth, Columbus, Charlotte, San Francisco, Indianapolis, Seattle, Denver, Washington, Boston, El Paso, Nashville, Detroit, Oklahoma City, Portland, Las Vegas, Memphis, Louisville, Baltimore, Milwaukee, Albuquerque, Tucson, Fresno, Mesa, Sacramento, Atlanta, Kansas City, Colorado Springs, Omaha, Raleigh, Miami, Long Beach, Virginia Beach, Oakland, Minneapolis, Tulsa, Tampa, Arlington, New Orleans, Wichita, Bakersfield, Cleveland, Aurora, Anaheim, Honolulu, Santa Ana, Riverside, Corpus Christi, Lexington, Henderson, Stockton, Saint Paul, Cincinnati, St. Louis, Pittsburgh, Greensboro, Lincoln, Anchorage, Plano, Orlando, Irvine, Newark, Durham, Chula Vista, Toledo, Fort Wayne, St. Petersburg, Laredo, Jersey City, Chandler, Madison, Lubbock, Scottsdale, Reno, Buffalo, Gilbert, Glendale, North Las Vegas, Winston-Salem, Chesapeake, Norfolk, Fremont, Garland, Irving, Hialeah, Richmond, Boise, Spokane, Baton Rouge, Tacoma, San Bernardino, Modesto, Fontana, Des Moines, Moreno Valley, Santa Clarita, Fayetteville, Birmingham, Oxnard, Rochester, Port St. Lucie, Grand Rapids, Huntsville, Salt Lake City, Frisco, Yonkers, Amarillo, Glendale, Huntington Beach, McKinney, Montgomery, Augusta, Aurora, Akron, Little Rock, Tempe, Columbus, Overland Park, Grand Prairie, Tallahassee, Cape Coral, Mobile, Knoxville, Shreveport, Worcester, Ontario, Vancouver, Sioux Falls, Chattanooga, Brownsville, Fort Lauderdale, Providence, Newport News, Rancho Cucamonga, Santa Rosa, Peoria, Oceanside, Elk Grove, Salem, Pembroke Pines, Eugene, Garden Grove, Cary, Fort Collins, Corona, Springfield, Jackson, Alexandria, Hayward, Clarksville, Lakewood, Lancaster, Salinas, Palmdale, Hollywood, Springfield, Macon, Kansas City, Sunnyvale, Pomona, Killeen, Escondido, Pasadena, Naperville, Bellevue, Joliet, Murfreesboro, Midland, Rockford, Paterson, Savannah, Bridgeport, Torrance, McAllen, Syracuse, Surprise, Denton, Roseville, Thornton, Miramar, Pasadena, Mesquite, Olathe, Dayton, Carrollton, Waco, Orange, Fullerton, Charleston, West Valley City, Visalia, Hampton, Gainesville, Warren, Coral Springs, Cedar Rapids, Round Rock, Sterling Heights, Kent, Columbia, Santa Clara, New Haven, Stamford, Concord, Elizabeth, Athens, Thousand Oaks, Lafayette, Simi Valley, Topeka, Norman, Fargo, Wilmington, Abilene, Odessa, Columbia, Pearland, Victorville, Hartford, Vallejo, Allentown, Berkeley, Richardson, Arvada, Ann Arbor, Rochester, Cambridge, Sugar Land, Lansing, Evansville, College Station, Fairfield, Clearwater, Beaumont, Independence, Provo, West Jordan, Murrieta, Palm Bay, El Monte, Carlsbad, North Charleston, Temecula, Clovis, Springfield, Meridian, Westminster, Costa Mesa, High Point, Manchester, Pueblo, Lakeland, Pompano Beach, West Palm Beach, Antioch, Everett, Downey, Lowell, Centennial, Elgin, Richmond, Peoria, Broken Arrow, Miami Gardens, Billings, Jurupa Valley, Sandy Springs, Gresham, Lewisville, Hillsboro, Ventura, Greeley, Inglewood, Waterbury, League City, Santa Maria, Tyler, Davie, Lakewood, Daly City, Boulder, Allen, West Covina, Sparks, Wichita Falls, Green Bay, San Mateo, Norwalk, Rialto, Las Cruces, Chico, El Cajon, Burbank, South Bend, Renton, Vista, Davenport, Edinburg, Tuscaloosa, Carmel, Spokane Valley, San Angelo, Vacaville, Clinton, Bend, Woodbridge.
Specification of Stainless Steel 317L Sheets, Plates, Coils
Specifications: ASTM A240 / ASME SA240
Dimensions: ASTM, ASME, and API.
Width: 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Thickness:4mm-100mm
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Surface Finish: 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, chequered, embossed, hairline, sand blast, Brush, etching, Hot rolled plate (HR), Cold rolled sheet (CR), SATIN (Met with Plastic Coated) etc
Form: Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
317L Stainless Steel Sheets, Plates, Coils Chemical Composition
Grade |
C |
Mn |
Si |
P |
S |
Cr |
Mo |
Ni |
Fe |
SS 317L |
0.035 max |
2.0 max |
1.0 max |
0.045 max |
0.030 max |
18.00 – 20.00 |
3.00 – 4.00 |
11.00 – 15.00 |
57.89 min |
Stainless Steel 317L Sheets, Plates, Coils Mechanical Properties
Density |
Melting Point |
Tensile Strength |
Yield Strength (0.2%Offset) |
Elongation |
7.9 g/cm3 |
1400 °C (2550 °F) |
Psi – 75000, MPa – 515 |
Psi – 30000, MPa – 205 |
35 % |
Stainless Steel 317L Sheets, Plates, Coils Equivalent Grades
STANDARD |
WERKSTOFF NR. |
UNS |
JIS |
EN |
SS 317L |
1.4438 |
S31703 |
SUS 317L |
X2CrNiMo18-15-4 |
ASTM / ASME SA240 Type 317L Steel Plate Types
SS 317L HR Sheets |
ASTM A240 Grade 317L Tread Plate |
Stainless Steel 317L Floor Plate |
Stainless Steel 317L Diamond Sheet |
SS 317L CR Plate |
SS 317L HR Plate |
BS EN 10088-2 Diamond Stainless Steel 317L Plate |
317L Polished Stainless Steel Sheet |
Cold rolled Stainless Steel 317L sheet |
Stainless Steel 317L Hot Rolled plate |
2B finish 317L Stainless Steel sheet |
317L Stainless Steel Cut to size plate |
Stainless Steel 317L Coils |
Stainless Steel 317L Chequered Plate |
2B BA Hairline Mirror finish Stainless Steel 317L sheet |
Brush Stainless Steel 317L Plate |
Stainless Steel 317L Galvanized Sheets |
317L Stainless Steel Checker Plate |
ASTM A240 Type 317L Perforated Stainless Steel Sheet |
317L Stainless Steel 2B Plate |
AISI 317L Plate |
317L Stainless Steel Cold Rolled Coils |
8K Mirror Finish Stainless Steel 317L Sheet |
Stainless Steel 317L Hairline Sheet |
Bright Annealed SS 317L Sheet |
Stainless Steel Sheet ASTM A240 TP317L |
No.4 Stainless Steel 317L Sheet |
SS UNS S31703 Diamond Plate |
317L Stainless Steel Durbar Plate |
Stainless Steel 317L Rolls Sheets |
Stainless Steel 317L Design Sheet |
Stainless Steel 317L Expanded Sheet |
WNR 1.4438 Clad Plate |
Stainless Steel 317L Strip |
Stainless Steel 317L Shim Sheet |
Stainless Steel 317L Quarto Plate |
SS 317L Polished Plates |
Stainless Steel 317L Perforated Sheet |
Stainless Steel 317L Cold Rolled Plates |
Austenitic Stainless Steel 317L Sheet |
Our Products
Related Products
- Stainless Steel 304 Electropolished Tubes
- Stainless Steel 304L Electropolished Pipes & Tubes
- Stainless Steel 304H Electropolished Pipes & Tubes
- Stainless Steel 310/310S Electropolished Pipes & Tubes
- Stainless Steel 310H Electropolished Pipes & Tubes
- Stainless Steel 316/316L Electropolished Pipes & Tubes
- Stainless Steel 316Ti Electropolished Pipes & Tubes
- Stainless Steel 317 Electropolished Pipes & Tubes
- Stainless Steel 317L Electropolished Pipes & Tubes
- Stainless Steel 347/347H Electropolished Pipes & Tubes
- Stainless Steel 904L Electropolished Pipes & Tubes
- Stainless Steel 304 Flange Manufacturer
- Stainless Steel 304L Flange Manufacturer
- Stainless Steel 304H Flanges Manufacturer
- Stainless Steel 310 Flange Manufacturer
- Stainless Steel 310S Flange Manufacturer
- Stainless Steel 310H Flange Manufacturer
- Stainless Steel 316 Flange Manufacturer
- Stainless Steel 316L Flange Manufacturer
- Stainless Steel 316H Flange Manufacturer
- Stainless Steel 316Ti Flange Manufacturer
- Stainless Steel 317 Flanges Manufacturer
- Stainless Steel 317L Flange Manufacturer
- Stainless Steel 321 Flanges Manufacturer
- Stainless Steel 321H Flanges Manufacturer
- Stainless Steel 347 Flange Manufacturer
- Stainless Steel 347H Flanges Manufacturer
- Stainless Steel 904L Flanges Manufacturer
- Stainless Steel 304 Pipe Fittings Manufacturer
- Stainless Steel 304L Pipe Fittings Manufacturer
- Stainless Steel 304H Pipe Fittings Manufacturer
- Stainless Steel 310/310S Pipe Fittings
- Stainless Steel 310H Pipe Fittings Manufacturer
- Stainless Steel 316 Pipe Fittings Manufacturer
- Stainless Steel 316L Pipe Fittings Manufacturer
- Stainless Steel 316H Pipe Fittings Manufacturer
- Stainless Steel 316Ti Pipe Fittings Manufacturer
- Stainless Steel 317 Pipe Fittings Manufacturer
- Stainless Steel 317L Pipe Fittings Manufacturer
- Stainless Steel 321 / 321H Pipe Fittings Manufacturer
- Stainless Steel 347 Pipe Fittings Manufacturer
- Stainless Steel 347H Pipe Fittings Manufacturer
- Stainless Steel 904L Pipe Fittings Manufacturer
- Stainless Steel 304 Sheet / Plate Supplier & Manufacturer
- Stainless Steel 304H Sheet / Plate Supplier & Stockist
- Stainless Steel 304L Sheet / Plate Supplier & Stockist
- Stainless Steel 310/310S Sheet / Plate Supplier & Stockist
- Stainless Steel 310H Sheet / Plate Supplier & Stockist
- Stainless Steel 316/316L Sheet / Plate Supplier & Stockist
- Stainless Steel 316Ti Sheet / Plate Supplier & Manufacturer
- Stainless Steel 317 Sheet / Plate Supplier & Manufacturer
- Stainless Steel 317L Sheet / Plate Supplier & Manufacturer
- Stainless Steel 321/321H Sheet / Plate Supplier & Stockist
- Stainless Steel 347 Sheet / Plate Stockist & Manufacturer
- Stainless Steel 347H Sheet / Plate Stockist & Manufacturer
- Stainless Steel 904L Sheet / Plate Manufacturer & Stockist
- Stainless Steel 304 Forged Fittings Manufacturer
- Stainless Steel 304L Forged Fittings Manufacturer
- Stainless Steel 304H Forged Fittings Manufacturer
- Stainless Steel 310 / 310S Forged Fittings Manufacturer
- Stainless Steel 310H Forged Fittings Manufacturer
- Stainless Steel 316 / 316L Forged Fittings Manufacturer
- Stainless Steel 316H Forged Fittings
- Stainless Steel 316Ti Forged Fittings Manufacturer
- Stainless Steel 317 Forged Fittings Manufacturer
- Stainless Steel 317L Forged Fittings Manufacturer
- Stainless Steel 321 / 321H Forged Fittings Manufacturer
- Stainless Steel 347/ 347H Forged Fittings Manufacturer
- Stainless Steel 904L Forged Fittings Manufacturer
- Stainless Steel 304 Seamless Pipes Manufacturer
- Stainless Steel 304L Seamless Pipes Manufacturer
- Stainless Steel 304H Seamless Pipes Manufacturer
- Stainless Steel 310 / 310s Seamless Pipes Supplier
- Stainless Steel 310H Seamless Pipes Manufacturer
- Stainless Steel 316/316L Seamless Pipes Manufacturer
- Stainless Steel 316H Seamless Pipes Supplier
- Stainless Steel 316Ti Seamless Pipes Supplier
- Stainless Steel 317 Seamless Pipes Supplier
- Stainless Steel 317L Seamless Pipes Supplier
- Stainless Steel 321/321H Seamless Pipes Manufacturer
- Stainless Steel 347/347H Seamless Pipes Supplier
- Stainless Steel 904L Seamless Pipes Manufacturer
- Stainless Steel 304 Seamless Tubes Manufacturer
- Stainless Steel 304L Seamless Tubes Manufacturer
- Stainless Steel 304H Seamless Tubes Manufacturer
- Stainless Steel 310 / 310s Seamless Tubes Supplier
- Stainless Steel 310H Seamless Tubes Manufacturer
- Stainless Steel 316/316L Seamless Tubes Manufacturer
- Stainless Steel 316H Seamless Tubes Supplier
- Stainless Steel 316Ti Seamless Tubes Supplier
- Stainless Steel 317 Seamless Tubes Supplier
- Stainless Steel 317L Seamless Tubes Supplier
- Stainless Steel 321/321H Seamless Tubes Manufacturer
- Stainless Steel 347/347H Seamless Tubes Supplier
- Stainless Steel 904L Seamless Tubes Manufacturer
- Stainless Steel 304 Bolt/Nut Manufacturer
- Stainless Steel 304L Bolt/Nut Manufacturer
- Stainless Steel 310 / 310S Bolt/Nut Manufacturer
- Stainless Steel 316 / 316L Bolt/Nut Manufacturer
- Stainless Steel 316Ti Bolt/Nut Manufacturer
- Stainless Steel 317 Bolt/Nut Manufacturer
- Stainless Steel 317L Bolt/Nut Manufacturer
- Stainless Steel 321/321H Bolt/Nut Manufacturer
- Stainless Steel 347 Bolt/Nut Manufacturer
- Stainless Steel 347H Bolt/Nut Manufacturer
- Stainless Steel 410 Bolt/Nut Manufacturer
- Stainless Steel 446 Bolt/Nut Manufacturer
- Stainless Steel 904L Bolt/Nut Manufacturer
- Stainless Steel 304 Welded Tubes Manufacturer
- Stainless Steel 304L Welded Tubes Manufacturer
- Stainless Steel 304H Welded Tubes Manufacturer
- Stainless Steel 310/310S Welded Tubes Manufacturer
- Stainless Steel 310H Welded Tubes Manufacturer
- Stainless Steel 316/316L Welded Tubes Manufacturer
- Stainless Steel 316H Welded Tubes Manufacturer
- Stainless Steel 316Ti Welded Tubes Manufacturer
- Stainless Steel 317 Welded Tubes Manufacturer
- Stainless Steel 317L Welded Tubes Manufacturer
- Stainless Steel 321/321H Welded Tubes Manufacturer
- Stainless Steel 347/347H Welded Tubes Manufacturer
- Stainless Steel 904L Welded Tubes Manufacturer
- Stainless Steel 304 Welded Pipes Manufacturer
- Stainless Steel 304L Welded Pipes Manufacturer
- Stainless Steel 304H Welded Pipes Manufacturer
- Stainless Steel 310/310S Welded Pipes Manufacturer
- Stainless Steel 310H Welded Pipes Manufacturer
- Stainless Steel 316L Welded Pipes Manufacturer
- Stainless Steel 316H Welded Pipes Supplier
- Stainless Steel 316Ti Welded Pipes Supplier
- Stainless Steel 317 Welded Pipes Supplier
- Stainless Steel 317L Welded Pipes Supplier
- Stainless Steel 321/321H Welded Pipes Manufacturer
- Stainless Steel 347/347H Welded Pipes Supplier
- Stainless Steel 904L Welded Pipes Manufacturer
Before You Go…
would you like a copy of our Handy Guide to leasing an industrial unit straight to your inbox?
Call Us At
Feel free to call on
+91 79774 55576
022-66394744/45
Drop Mail
For Domestic Queries:
jay@newzelindustries.com
For International Queries:
info@newzelindustries.com