Inconel Tubes

Inconel Tube Supplier in India

Inconel Tube supplier in India, ASTM B163 Incoloy Seamless And Welded Tubing Manufacturer, Inconel Alloy Instrumentation Tube In Mumbai.

Inconel Tube Suppliers, Inconel Tube Sizes, Inconel Tube UK, Astm B163 Inconel Tube Manufacturer, Inconel Tube Manufacturer, Inconel Tube Price, Inconel 625 tubes, Inconel gas tube, Inconel boiler tubes, Inconel 600 tubes.

Inconel alloys are highly engineered to offer a superior combination of high-temperature corrosion resistance, toughness, heat resistance, and strength for the most demanding environments. Newzel Industries is one of the largest manufacturers of Inconel tubes in India.

What is Inconel ?

Inconel is a family of austenitic nickel-chromium-based superalloys. Inconel alloys are oxidation-corrosion-resistant materials well suited for service in extreme environments subjected to pressure and heat. When heated, Inconel forms a thick, stable, passivating oxide layer protecting the surface from further attack. Inconel retains strength over a wide temperature range, attractive for high-temperature applications where aluminum and steel would succumb to creep as a result of thermally induced crystal vacancies.

Inconel grades and their applications

Inconel is a brand name for a group of nickel-chromium alloys. These alloys are known for their high strength and resistance to oxidation and corrosion. Inconel alloys are often used in high-temperature applications.

There are many different grades of Inconel, each with its own specific properties and applications. Some common grades of Inconel include:

Inconel 600: This grade has good resistance to corrosion and oxidation at high temperatures. It is often used in chemical processing, gas turbine engines, and heat exchangers.

Inconel 625: This grade has excellent weldability and is often used in aircraft engine parts, chemical processing equipment, and marine hardware.

Inconel 718: This grade is precipitation-hardened and has good fatigue resistance. It is often used in aerospace applications, such as jet engines and rocket motors.

If you are in need of an Inconel alloy for your high-temperature application, be sure to contact a reputable Inconel tube supplier in India.

Inconel Tube Specification

Standard

ASTM, AISI, GB, JIS, customers’ requests available

Size

Round Tube: OD: 16-119mm or customized

Thickness

0.25mm-3.0mm

Length

6m or according to customers’ request

Sample

Free sample is available, but freight should be paid by you

 

Tolerance

 

Outer diameter: ±0.2mm

Thickness: ±0.05mm

Length: ±0.5mm

Ends

In the plain end or beveled ends or as your requirements

Welding Line Type

ERW (Electrical Resistance Weld)

 

 

Finishing

 

 

 

A. Sanded

B. Gloss #400,Mirror #600 – #1000

C. Brushed

D. Wood Grain

E. Embossed, Threaded

Application

Decorations, constructions, food industry, etc.

Certification

ISO, SGS

Round Pipe Size

16, 17, 18, 19, 20, 21, 22, 23, 25, 28, 31.8, 35, 36, 38.1, 48, 50.8, 60, 63.5, 76.2, 89, 101, 114 mm

Square Pipe Size

17, 18, 19, 20, 21, 22, 23, 24, 25, 28, 30, 36, 38, 50 mm

Rectangle Pipe Size

10*30, 10*40, 10*50, 20*10, 23*11, 24*12, 25*13, 28*25, 28*13, 29*14, 30*15, 30*20, 30*22, 34*22, 36*23, 50*25, 60*30, 75*45, 95*45 mm

Thickness

exact 0.25, 0.28, 0.32, 0.37, 0.41, 0.51, 0.61, 0.71, 0.91, 1.11, 1.15, 1.41 mm

Length

6m or according to the customer’s request

Outer diameter

6.35-219mm

Tolerance

Outer diameter:±0.2mm

Thickness:±0.02mm

Length:±0.5mm

Process method

Code drawn, annealed with nitrogen protection, ultrasonic, automatic shape, polished

Test

Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector

Equipment

Press machine, Bending machine, Pushing Machine, electric bevelling machine Sand-blasting machine, etc

Origin

West Europe / Japanese / Indian / USA / Korean / American / European

Test Certificates

Manufacturer Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report

Weight Chart Of ASME SB163 Inconel Cold Rolled Coiled Tubing

DIMENSIONS WALL WEIGHT PER DIMENSIONS WALL WEIGHT PER
(MM) (MM) METRE (KG) (MM) (MM) METRE (KG)
12.7 x 12.7 1.20 0.44 40 x40 1.20 1.49
12.7 x 12.7 1.50 0.55 40 x40 1.50 1.85
15 x 15 1.20 0.53 40 x40 2.00 2.45
15 x 15 1.50 0.65 40 x40 3.00 3.75
20 x 20 1.20 0.71 50 x50 1.50 2.32
20 x 20 1.50 0.88 50 x50 2.00 3.08
20 x 20 2.00 1.19 50 x50 3.00 4.65
25 x 25 1.20 0.92 60 x60 2.00 3.71
25 x 25 1.50 1.14 60 x60 3.00 5.49
25 x 25 2.00 1.49 70 x70 3.00 6.53
25 x 25 3.00 2.20 80 x80 2.00 4.98
30 x 30 1.20 1.10 80 x80 3.00 7.53
30 x 30 1.50 1.37 100 x 100 2.00 6.40
30 x 30 2.00 1.84 100 x 100 3.00 9.53
30 x 30 3.00 2.72

Inconel Alloy Instrumentation Tube Dimensions Chart

Gauge Outside Diameter Tolerance mm Regular Wall (RW) mm Thin Wall (TW) mm Extra Thin Wall (XTW) mm Ultra Thin Wall (UTW) mm
30 0.304 – 0.317 0.064 – 0.089
29 o.330 – 0.342 0.064 – 0.089
28 0.355 – 0.368 0.076 – 0.102
27 0.406 – 0.419 0.089 – 0.115 0.064 – 0.089
26 0.457 – 0.469 0.089 – 0.114
25 0.508 – 0.520 0.115 – 0.140 0.089 – 0.114
24 0.558 – 0.571 0.114 – 0.140 0.089 – 0.114 0.051 – 0.102
23 0.635 – 0.647 0.140 – 0.165 0.089 – 0.114 0.051 – 0.102
22 0.711 – 0.723 0.140 – 0.165 0.096 – 0.121 0.077 – 0.102 0.051 – 0.102
21 0.812 – 0.825 0.140 – 0.165 0.102 – 0.127 0.051 – 0.102
20 0.901 – 0.914 0.108 – 0.165 0.108 – 0.134
19 1.054 – 1.079 0.166 – 0.216 0.102 – 0.140 0.070 – 0.108
18 1.257 – 1.282 0.191 – 0.241 0.127 – 0.165 0.083 – 0.121 0.051 – 0.102
17 1.460 – 1.485 0.177 – 0.229 0.115 – 0.152 0.083 – 0.127 0.057 – 0.102
16 1.638 – 1.663 0.204 – 0.254 0.127 – 0.165 0.096 – 0.133 0.070 – 0.121
15 1.816 – 1.841 0.204 – 0.254 0.127 – 0.165 0.096 – 0.134 0.070 – 0.121
14 2.082 – 2.133 0.216 – 0.292 0.165 – 0.229 0.114 – 0.165 0.076 – 0.134
13 2.387 – 2.438 0.267 – 0.343 0.191 – 0.267
12 2.743 – 2.749 0.267 – 0.321
11 3.023 – 3.073 0.293 – 0.368 0.216 – 0.292
10 3.378 – 3.429 0.318 – 0.394 0.216 – 0.292

Surface Finishing Treatments Of Inconel Rectangular Tubing

Surface Finish Internal Surface(ID) Exterbal Surface(OD)
Roughness Average(RA) Roughness Average(RA)
μ inch μm μ inch μm
EP Electro Polish 15,10,7,5 0.38,0.25,0.20;0.13 32 0.8
AP Annealed & Pickled Not Defined Not Defined 40 or Not defined 1.0 or Not defined
MP Mechanical Polish 40,32,25,20 1.0,0.8,0.6,0.5 32 0.8
BA Beight Annealed 40,32,25,20 1.0,0.8,0.6,0.5 32 0.8

Inconel Alloy Square Tube Gauge Thickness

GAUGE THICKNESS RANGE (INCH) TYPICAL VALUE (INCH)
22 0.025 – 0.029 0.028
20 0.031 – 0.035 0.035
19 0.038 – 0.042 0.042
18 0.044 – 0.049 0.049
17 0.053 – 0.058 0.058
16 0.060 – 0.065 0.065
15 0.066 – 0.074 0.072
14 0.075 – 0.085 0.083
13 0.087 – 0.097 0.095
12 0.101 – 0.111 0.109
11 0.112 – 0.122 0.12
10 0.126 – 0.136 0.134
9 0.140 – 0.150 0.148
8 0.157 – 0.167 0.165
7 0.175 – 0.185 0.18

Tolerances Of Inconel Gas Tube

  • Straightness: .030″ in 3″
  • Wall Tolerance +/- 10%
O.D. INCHES WALL THICKNESS INCHES O.D. +/- INCHES
1/2″ to 1″ incl. .025 to .065 .005
Over .065 to .134 .010
1 to 1-1/2″ incl. .025 to .065 .008
Over .065 to .134 .010
1-1/2″ to 2″ incl. .025 to .049 .010
Over .049 to .083 .011
Over .083 to .148 .012
2″ to 2-1/2″ incl. .032 to .065 .012
Over .065 to .109 .013
Over .109 to .165 .014
2-1/2″ to 3-1/2″ incl. .032 to .165 .014
Over .165 to .220 .020
3-1/2″ to 5″ incl. .083 to .165 .020
Over .165 to .220 .025

 

Standard Of Inconel Alloy Bright Annealed Tube

Specifications:

ASTM B444, ASTM B751, ASTM B829, ASTM B775, ASTM B705, ASTM B704, AMS 5581

International Specifications:

ISO 6207, VdTüV 499, BS 3074NA21, DIN 17751, WERKSTOFF Nr 2.4856

Chemical Composition Of Inconel Tube

Inconel Element (% By Mass)
Ni Cr Fe Mo Nb Co Mn Cu Al Ti Si C S P B
600 72.0 14.0–17.0 6.0–10.0 1.0 0.5 0.5 0.15 0.015
617 44.2–56.0 20.0–24.0 3.0 8.0–10.0 10.0–15.0 0.5 0.5 0.8–1.5 0.6 0.5 0.15 0.015 0.015 0.006
625 58.0 20.0–23.0 5.0 8.0–10.0 3.15–4.15 1.0 0.5 0.4 0.4 0.5 0.1 0.015 0.015
690 59.5 30 9.2 0.35 0.01 0.02 0.35 0.019 0.003
718 50.0–55.0 17.0–21.0 Balance 2.8–3.3 4.75–5.5 1.0 0.35 0.2–0.8 0.65–1.15 0.3 0.35 0.08 0.015 0.015 0.006
X-750 70.0 14.0–17.0 5.0–9.0 0.7–1.2 1.0 1.0 0.5 0.4–1.0 2.25–2.75 0.5 0.08 0.01

Inconel Alloy Tubing Mechanical Properties

Tensile Strength (MPa) Min Yield Strength 0.2% Proof (MPa) Min Elongation (% In 50mm) Min Hardness
Rockwell B (HR B) Max Brinell (HB) Max
Psi – 1,35,000 , MPa -930 Psi – 75,000 , MPa – 517 42.5

Equivalent Grades For Incoloy Tube

Alloy
UNS Designation
Inconel Tube

Ni-Cr-Fe

N06045

B 163, B 167

Low C-Ni-Cr-Mo

N06686

B163, B619, B622, B626

Low C-Ni-Mo-Cr

N06022

B619, B622, B626

Low C-Ni-Cr-Mo

N06059

B 619, B622, B626

Ni-Cr-Fe-Al

N06603

B 163, B167, B516, B517

Ni-Cr-Fe-Mo-Cu

N06007

B619, B622, B626

Ni-Cr-W-Mo

N06230

B619, B622, B626

Ni-Cr-Mo low C

N06058

B 619, B 622,B626

Ni-Cr-Fe-Mo-Cu

N06985

B B619, B 622, B626

Ni-Cr-Mo-Cb

N06625

B444, B704, B705

Low C-Ni-Cr-Mo-Ta

N 06210

B619, B622, B626

Ni-Cr-Fe

N06025

B163, B167

Low C-Ni-Cr-Mo-Cu

N06200

B619, B622, B626

Low –C-Ni-Mo-Cr

N06455

B619, B622, B626

Ni-Cr-Fe

N06600

B 167, B 516,B517

Ni-Cr-Mo

N06035

B 619, B622,B6263

Ni-Cr-Fe-Mo-Cu

N06030

B619, B622, B626

Ni-Cr-Mo-Si

N06219

B444, B704, B705

Ni-Cr-Mo-Fe

N06002

B619, B622, B626

Size Range Of Inconel Alloy Tube

Wall Thickness Inconel Tube Sizes ( O.D.)
.010 1/16″ , 1/8″ , 3/16″
.020 1/16″ , 1/8″ , 3/16″ , 1/4″ , 5/16″ , 3/8″
.012 1/8″
.016 1/8″ , 3/16″
.028 1/8″ , 3/16″ , 1/4″ , 5/16″ , 3/8″ , 1/2″ , 3/4″ , 1″ , 1 1/2″ , 2″
.035 1/8″ , 3/16″ , 1/4″ , 5/16″ , 3/8″ , 7/16″ , 1/2″ , 16″ , 5/8″ , 3/4″ , 7/8″ , 1″ , 1 1/4″ , 1 1/2″ , 1 5/8″ , 2″ , 2 1/4″
.049 3/16″ , 1/4″ , 5/16″ , 3/8″ , 1/2″ , 16″ , 5/8″ , 3/4″ , 7/8″ , 1″ , 1 1/8″ , 1 1/4″ , 1 1/2″ , 1 5/8″ , 2″ , 2 1/4″
.065 1/4″ , 5/16″ , 3/8″ , 1/2″ , 16″ , 5/8″ , 3/4″ , 7/8″ , 1″ , 1 1/4″ , 1 1/2″ , 1 5/8″ , 1 3/4″ , 2″ , 2 1/2″ , 3″
.083 1/4″ , 3/8″ , 1/2″ , 5/8″ , 3/4″ , 7/8″ , 1″ , 1 1/4″ , 1 1/2″ , 1 5/8″ , 1 7/8″ , 2″ , 2 1/2″ ,3″
.095 1/2″ , 5/8″ , 1″ , 1 1/4″ , 1 1/2″ , 2″
.109 1/2″ , 3/4″ , 1″ , 1 1/4″ , 1 1/2″ , 2″
.120 1/2″ , 5/8″ , 3/4″ , 7/8″ , 1″ , 1 1/4″ , 1 1/2″ , 2″ , 2 1/4″ , 2 1/2″ , 3″
.125 3/4″ , 1″ , 1 1/4″ , 1 1/2″ , 2″ , 3″ , 3 1/4″
.134 1″
.250 3″
.375 3 1/2″

Incoloy Tube Pressure Rating

Tube O.D.
(in.)
Wall Thickness of Tube (inches)
.028 .035 .049 .065 .083 .095 .109 .120
Working Pressure (psig)
1/8 7900 10100            
1/4 3700 4800 7000 9500        
5/16   3700 5400 7300        
3/8   3100 4400 6100        
1/2   2300 3200 4400        
3/4     2200 3000 4000 4600    
1       2200 2900 3400 3900 4300

Why choose Inconel tubes?

Inconel tubes offer a number of advantages over other types of tubing. They are more resistant to corrosion and can withstand higher temperatures, making them ideal for use in harsh environments. Inconel tubes are also stronger and lighter than other types of tubing, making them easier to transport and install.

If you are in need of a reliable and high-quality tubing solution, then Inconel tubes may be the perfect option for you. Contact a reputable Inconel tube supplier in India today to learn more about this innovative product.

Our Products