ASTM B161 Nickel 200 Seamless Pipe Manufacturers, Nickel WERKSTOFF NR. 2.4066 Pipe, Nickel 200 Hexagonal Pipe, ASME SB622 Welded Nickel Pipes, ASME SB 161 Nickel Alloy 200 Seamless Pipes Exporters in Abu Dhabi, Nickel UNS N02200 Welded Pipes Suppliers in India.
UNS N02200 Welded Pipe Exporter, Suppliers of ASTM B161 Nickel 200 Seamless Pipes, Manufacturer of Nickel® 200 Pipes, Mirror finish 200 Nickel Seamless Pipe, Alloy 200 Pipe, GOST НП-2 Pipe, Nickel WERKSTOFF NR. 2.4066 Pipe Supplier in Europe.
200 Nickel Seamless Pipes, 200 Nickel Welded Pipe Manufacturer, Pipe, Nickel 200 Welded Pipes, 200 Nickel Hollow Pipe, Nickel DIN 2.4066 Pipes, Nickel 200 Bush Hex Pipe, 200 Nickel Pipes, 200 Alloy Seamless Pipes, ASME SB622 Nickel Pipe Suppliers, and Exporters Saudi Arabia.
Detailed Information
Manufacturer & Supplier of Nickel Alloy 200 Pipes in Mumbai, India
These Nickel 200 Seamless Pipes (UNS N02200) is a commercially pure nickel that exhibits good corrosion resistance. Nickel 200 pipe is normally limited to those applications where the temperature settings remain below 600° F. At higher temperatures, say beyond a temperature of 600° F, Nickel 200 products such as Nickel DIN NR. 2.4066 Pipe can suffer from graphitization. Thusly, the graphitization of Nickel 200 Hexagonal Pipe can result or yield in seriously undermined properties of the material. Applications, where the Nickel Alloy 200 ERW Pipe can be utilized, incorporate engineered fiber creation, compound preparing, and capacity, just as in those cycles where sodium hydroxide and fluorine are used. Other utilizations of the Alloy UNS N02200 Round Pipe remember its utilization for aviation and safeguard alongside food handling.
Newzel Industry is a specialist in manufacturing Nickel 200 Pipes from high-quality raw material, which is a modification to control carbon which keeps it from being embrittled by intergranular precipitates at temperatures of 600 Degree F to 1400 Degree F in many processes.
Nickel WERKSTOFF NR. 2.4066 Pipe has exceptional resistance to caustic alkalies at different concentrations and various temperature settings. These Nickel 200 Pipes are ferromagnetic and give high warm and electrical conductivity in contrast with nickel – base composites, impeccable and low compound prepares. Nickel 200 Pipes isn’t suggested for administration over 600 Degree F (316 Degree C) in light of the fact that long–time openings in the 800 Degree F to 1200 Degree F range bring about precipitation of a carbon-containing stage and loss of pliability. These Nickel 200 Pipes additionally have a high Curie temperature and great magnetostrictive properties.
These Nickel 200 Welded Pipe are a universally useful grade often supplied in the solidified, yet machinable condition, for applications where high strength and moderate warmth and erosion obstruction are required. Because of the wide scope of widths and thicknesses and the assortment of tempers delivered in our Nickel 200 Pipe Seamless Pipes and cut lengths, no levelness resiliences have been set up for cold-moved hardened steel. The packaging is done in wooden boxes, bundled, wooden crates to protect the package from unauthorized access. Before supplying these Nickel UNS N02200 Pipe to our clients, they are tested in terms of quality by our quality controllers such as flaring test, flattening test, positive material test, third-party inspection test, chemical test, intergranular test, Rockwell hardness test, and mechanical test.
All cold working and hot working practices can be utilized when shaping these ASTM B161 Nickel 200 Seamless Pipes. Hot-working temperatures of these Nickel 200 Seamless Pipes must be in the range of 1200 Deg F and 2250 Deg F by means of having profound forming to be carried out at temperatures that would be more than 1600 Deg F. Annealing in ASTM B161 Nickel 200 Pipes must be carried out at a temperature that ranges between 1300 Deg F to 1600 Deg F. Hot forming the Nickel 200 Pipe is then followed by heavy forming, which has to be performed at a temperature setting of above 1600° F. Annealing should be performed on the ASME SB161 Nickel 200 Pipe at a temperature range between 1300° F and 1600° F. Care should be taken while picking the toughen temperature just as time at the strengthening temperature, on the grounds that these two boundaries can significantly impact not just the mechanical properties of the Nickel 200 Bush Hex Pipe yet additionally the design of the material.
Cities We Delivered
New York City, Los Angeles, Chicago, Houston, Phoenix, Philadelphia, San Antonio, San Diego, Dallas, San Jose, Austin, Jacksonville, Fort Worth, Columbus, Charlotte, San Francisco, Indianapolis, Seattle, Denver, Washington, Boston, El Paso, Nashville, Detroit, Oklahoma City, Portland, Las Vegas, Memphis, Louisville, Baltimore, Milwaukee, Albuquerque, Tucson, Fresno, Mesa, Sacramento, Atlanta, Kansas City, Colorado Springs, Omaha, Raleigh, Miami, Long Beach, Virginia Beach, Oakland, Minneapolis, Tulsa, Tampa, Arlington, New Orleans, Wichita, Bakersfield, Cleveland, Aurora, Anaheim, Honolulu, Santa Ana, Riverside, Corpus Christi, Lexington, Henderson, Stockton, Saint Paul, Cincinnati, St. Louis, Pittsburgh, Greensboro, Lincoln, Anchorage, Plano, Orlando, Irvine, Newark, Durham, Chula Vista, Toledo, Fort Wayne, St. Petersburg, Laredo, Jersey City, Chandler, Madison, Lubbock, Scottsdale, Reno, Buffalo, Gilbert, Glendale, North Las Vegas, Winston-Salem, Chesapeake, Norfolk, Fremont, Garland, Irving, Hialeah, Richmond, Boise, Spokane, Baton Rouge, Tacoma, San Bernardino, Modesto, Fontana, Des Moines, Moreno Valley, Santa Clarita, Fayetteville, Birmingham, Oxnard, Rochester, Port St. Lucie, Grand Rapids, Huntsville, Salt Lake City, Frisco, Yonkers, Amarillo, Glendale, Huntington Beach, McKinney, Montgomery, Augusta, Aurora, Akron, Little Rock, Tempe, Columbus, Overland Park, Grand Prairie, Tallahassee, Cape Coral, Mobile, Knoxville, Shreveport, Worcester, Ontario, Vancouver, Sioux Falls, Chattanooga, Brownsville, Fort Lauderdale, Providence, Newport News, Rancho Cucamonga, Santa Rosa, Peoria, Oceanside, Elk Grove, Salem, Pembroke Pines, Eugene, Garden Grove, Cary, Fort Collins, Corona, Springfield, Jackson, Alexandria, Hayward, Clarksville, Lakewood, Lancaster, Salinas, Palmdale, Hollywood, Springfield, Macon, Kansas City, Sunnyvale, Pomona, Killeen, Escondido, Pasadena, Naperville, Bellevue, Joliet, Murfreesboro, Midland, Rockford, Paterson, Savannah, Bridgeport, Torrance, McAllen, Syracuse, Surprise, Denton, Roseville, Thornton, Miramar, Pasadena, Mesquite, Olathe, Dayton, Carrollton, Waco, Orange, Fullerton, Charleston, West Valley City, Visalia, Hampton, Gainesville, Warren, Coral Springs, Cedar Rapids, Round Rock, Sterling Heights, Kent, Columbia, Santa Clara, New Haven, Stamford, Concord, Elizabeth, Athens, Thousand Oaks, Lafayette, Simi Valley, Topeka, Norman, Fargo, Wilmington, Abilene, Odessa, Columbia, Pearland, Victorville, Hartford, Vallejo, Allentown, Berkeley, Richardson, Arvada, Ann Arbor, Rochester, Cambridge, Sugar Land, Lansing, Evansville, College Station, Fairfield, Clearwater, Beaumont, Independence, Provo, West Jordan, Murrieta, Palm Bay, El Monte, Carlsbad, North Charleston, Temecula, Clovis, Springfield, Meridian, Westminster, Costa Mesa, High Point, Manchester, Pueblo, Lakeland, Pompano Beach, West Palm Beach, Antioch, Everett, Downey, Lowell, Centennial, Elgin, Richmond, Peoria, Broken Arrow, Miami Gardens, Billings, Jurupa Valley, Sandy Springs, Gresham, Lewisville, Hillsboro, Ventura, Greeley, Inglewood, Waterbury, League City, Santa Maria, Tyler, Davie, Lakewood, Daly City, Boulder, Allen, West Covina, Sparks, Wichita Falls, Green Bay, San Mateo, Norwalk, Rialto, Las Cruces, Chico, El Cajon, Burbank, South Bend, Renton, Vista, Davenport, Edinburg, Tuscaloosa, Carmel, Spokane Valley, San Angelo, Vacaville, Clinton, Bend, Woodbridge.
Standard Specification For Nickel Alloy 200 Pipes & Tubes
Specifiation: ASTM B 161 ASME SB 161 / ASTM B 622 ASME SB 622
Standard: ASTM, ASME and API
Pipes Size : Seamless 1/2″ – 10″ , Welded 1/2″ – 48″
Tubing Size : 4 to 219mm W. T.: 0.5 to 20mm
Length : Within 13500mm
Schedule : SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Types : Seamless / ERW / Welded / EFW / Fabricated / CDW
Form : Round Pipes/Tubes, Square Pipes/Tubes, Rectangular Pipe/Tubes, Coiled Tubes, “U” Shape, Pan Cake Coils, Hydraulic Tubes
End : Plain End, Beveled End, Treaded
Grades : Nickel 200 (UNS No. N02200)
200 Nickel Alloy Pipes Chemical Composition
Nickel 200 | Ni | C | Mo | Mn | Si | Fe | P | S | Cu | Cr |
99.0 min | 0.15 max | – | 0.35 max | 0.1 max | 0.4 max | – | 0.01 max | 0.25 max | – |
Nickel Alloy UNS N02200 Pipe Mechanical Properties
Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 21500, MPa – 148 | Psi – 67000, MPa – 462 | 45 % |
Equivalent Grades for 200 Nickel Pipe
STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
Nickel 200 | N02200 | 2.4066 | N-100M | Ni 99.2 | NW 2200 | NA 11 | НП-2 |
Available Stock of Nickel 200 Pipe
ASTM B161 Nickel 200 Pipe | 4 inch Nickel WERKSTOFF NR. 2.4066 Pipe |
Nickel WERKSTOFF NR. 2.4066 Seamless Pipe | 200 Nickel Thick Wall Pipe |
Nickel Alloy 200 CDW Pipe | Cold Drawn 200 Nickel Seamless Pipe |
Nickel WERKSTOFF NR. 2.4066 Welded Pipe | ASME SB161 Nickel 200 Large Pipe |
200 Nickel ERW Pipe | Schedule 5S Ni200 Pipe |
ASME SB161 Nickel 200 EFW Pipe | Schedule 40 Nickel Alloy 200 Pipe |
Ni200 SMLS Pipe | Alloy 200 UNS N02200 Polished Pipe |
Capillary ASTM B161 Nickel 200 Thin Pipe | High-pressure UNS N02200 Pipe |
Nickel Alloy 200 Hollow Pipe | 200 Alloy Electropolished Pipe |
ASTM B161 200 Nickel Custom Pipe | ASTM B161 Nickel 200 Capillary Pipe |
Alloy 200 UNS N02200 Round Pipe | Alloy 200 Exhaust Pipe |
200 Alloy Square Pipe | Nickel 200 Thin Wall Pipe |
Alloy 200 Rectangular Pipe | Small diameter Nickel 200 pipe |
Nickel 200 Hexagonal Pipe | Nickel Alloy 200 Pipe material |
Nickel 200 Bush Hex Pipe | 2.4066 Alloy 200 Clad Pipe |
Nickel Alloy 200 Fabricated Pipe | ASTM B161 200 Nickel Annealed pipe |
2.4066 Alloy 200 Beveled End Pipe | Nickel Alloy 200 Rectangle Pipe |
UNS N02200 Cold Drawn Pipe | Cold Drawn ASTM B161 Nickel 200 Welded Pipe |
Alloy 200 Pipe Stock List
Alloy | Product form | Dimension |
NICKEL 200 (99.0 Ni min) | Pipe; cold drawn, annealed, seamless | 16.0 x 1.5 mm |
NICKEL 200/201 (99.0 Ni min) | Pipe; cold drawn, annealed | 33.4 x 3.38 mm (1″nb sch40s) |
NICKEL 200/201 (99.0 Ni min) | Pipe; cold drawn, annealed | 48.26 x 2.77 mm (1½”nb sch10s) |
NICKEL 200/201 (99.0 Ni min) | Pipe; cold drawn, annealed | 60.33 x 2.77 mm (2″nb Sch10s) |
NICKEL 200/201(99.0 Ni min) | Pipe; cold drawn, annealed | 60.33 x 3.91 mm (2″nb sch40s) |
NICKEL 200/201 (99.0 Ni min) | Pipe; cold drawn, annealed | 88.9 x 3.05 mm (3″nb Sch10s) |
NICKEL 200/201 (99.0 Ni min) | Pipe; cold drawn, annealed | 114.3 x 3.05 mm (4″nb Sch10s) |
Nickel 200 Pipe Pressure Rating
Pipe O.D.
(in.) |
Wall Thickness of Pipe (inches) | |||||||
.028 | .035 | .049 | .065 | .083 | .095 | .109 | .120 | |
Working Pressure (psig) | ||||||||
1/8 | 7900 | 10100 | ||||||
1/4 | 3700 | 4800 | 7000 | 9500 | ||||
5/16 | 3700 | 5400 | 7300 | |||||
3/8 | 3100 | 4400 | 6100 | |||||
1/2 | 2300 | 3200 | 4400 | |||||
3/4 | 2200 | 3000 | 4000 | 4600 | ||||
1 | 2200 | 2900 | 3400 | 3900 | 4300 |
Nickel N02200 Pipe Schedule Chart
1/8″ IPS(.405″O. D.) | 3 1/2″ IPS( 4.000″O. D.) |
SCH 40, 80 | SCH 10, 40, 80, 160, XXH |
1/4″ IPS(.540″O. D.) | 4″ IPS(4.500″O. D.) |
SCH 10, 40, 80 | SCH 10, 40, 80, 160, XXH |
3/8″ IPS(.675″O. D.) | 5″ IPS( 5.563″O. D.) |
SCH 10, 40, 80 | SCH 10, 40, 80, 160, XXH |
1/2″ IPS(.840″O. D.) | 6″ IPS(6.625″O. D.) |
SCH 5, 10, 40, 80, 160, XXH | SCH 5, 10, 40, 80, 120, 160, XXH |
3/4″ IPS(1.050″O. D.) | 8 ” IPS(8.625″O. D.) |
SCH 10, 40, 80, 160, XXH | SCH 5, 10, 40, 80, 120, 160, XXH |
1″ IPS:(1.315′O. D.) | 10″ IPS(10.750″O. D.) |
SCH 5, 10, 40, 80, 160, XXH | SCH 10, 20, 40, 80 (.500), TRUE 80(.500) |
1-1/4″ IPS(1.660″O. D.) | 12″ IPS(12.750″O. D.) |
SCH 10, 40, 80, 160, XXH | SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500) |
1-1/2″ IPS(1.900″O. D.) | 14″ IPS(14.000″O. D.) |
SCH 10, 40, 80, 160, XXH | SCH10 (.188), SCH40 (.375) |
2″ IPS(2.375″O. D.) | 16″ IPS(16.000″O. D.) |
SCH 10, 40, 80, 160, XXH | SCH10(.188), SCH40(.375) |
2 1/2″ IPS(2.875″O. D.) | 18″ IPS (18.000″O. D.) |
SCH 10, 40, 80, 160, XXH | SCH-40 (.375) |
3″ IPS( 3.500″O. D.) | |
SCH 5, 10, 40, 80, 160, XXH |
Our Products
Related Products
Before You Go…
would you like a copy of our Handy Guide to leasing an industrial unit straight to your inbox?
Call Us At
Feel free to call on
+91 79774 55576
022-66394744/45
Drop Mail
For Domestic Queries:
jay@newzelindustries.com
For International Queries:
info@newzelindustries.com