Duplex S32205 Sheets Manufacturer & Supplier
Dimension and wall thickness
Pipe diameters
Duplex Steel S32205 Sheets, S32205 Duplex Steel Plates, Duplex Steel S32205 Industrial Sheet, UNS S32205 Sheets, Duplex Steel S32205 Coils, 1.4462 Sheets, Duplex Steel S32205 Strips, Duplex Steel S32205 Foils, Sheets & Plates Manufacturer in Mumbai, India.
Buy Duplex Steel UNS S32205 Plates, S32205 Duplex Steel Sheets & Plates Stockist, Grade S32205 Duplex Steel #8 Finish Sheet Dealer, Duplex Steel S32205 Hot Rolled Sheet, S32205 Duplex Steel Sheet #4 Brushed Finish, Duplex Steel S32205 Matte Sheet, INOX 1.4462 Sheets & Plates Wholesaler, ASME SB 240 S32205 Sheets, S32205 Duplex Steel Circle, S32205 Duplex Steel Discs, Duplex Steel S32205 Sheet Cut To Size, S32205 Duplex Steel Sheets & Plates Supplier in India.
Detailed Information
Alloy Steel F9 Threaded Forged Fittings Manufacturer & Supplier
Duplex S31803 Coils provide remarkable flexibility and influence potency at both sub-zero and ambient temperatures. These Duplex S32205 Sheets have been quality tested against established parameters to verify that they fulfil the quality standards. Subsea control lines, offshore platforms, and other applications typically use Duplex S32205 Plates. Duplex 2205 Coils are utilised in structural and mechanical components, corrosion-resistant components, and a variety of other applications. Duplex S31803 Slatting Sheets resist corrosion in a wide range of non-oxidizing acids and greatly resist strong alkalis. Duplex S31803 Perforated Plates are stronger, have a lower coefficient of thermal expansion, have a higher heat conductivity than austenitic steels, and can tolerate temperatures of up to 300 degrees Celsius.
Duplex S32205 Perforated Sheets are long-lasting, durable, and efficient. They require little maintenance and last a long time. Copper is added to Super Duplex S32760 Perforated Sheets to improve its resistance to strong reducing acids such as sulphuric acid. Duplex S32205 Perforated Coils are also resistant to pitting in chloride solutions, as well as crevice and stress corrosion cracking. These Duplex Steel S31803 Sheets have better-localised corrosion resistance than Stainless Steel 316L and Stainless Steel 317L, and they can be used in industrial applications such as chemical plants, seawater pumps, seawater desalination plants, and so on. Our Duplex Steel S32205 Coils can be easily welded to carbon steel, alloy steels, or low-carbon austenitic stainless steels by using a low–carbon austenitic stainless steel with a molybdenum content intermediate to the two dissimilar metals as the filler metal. Forging temperatures for these Duplex Steel S31803 Slatting Coils should range between 1100 and 1250 degrees Celsius, with re-heating as needed and cooling in still air.
Duplex Steel S32205 Sheets are commonly used in the oil and gas industries for pipe, vessels, pumps, valves, wellhead machinery, subsea machinery, heat exchangers, separators, and other applications. These Duplex Steel S31803 Plates are resistant to sulphide chloride and stress corrosion environments. Duplex S31803 Slatting Coils are commonly used in subsea control lines and offshore installations. Duplex S32205 Perforated Sheets are strong, long-lasting, and cost-effective. They are low-maintenance and endure a long time. To strengthen resistance to strong reducing acids such as sulphuric acid, copper is added to Super Duplex S32760 Perforated Sheets. Duplex S32205 Perforated Coils are also resistant to chloride pitting, crevice and stress corrosion cracking. These Duplex Steel S31803 Sheets are more resistant to localised corrosion than Stainless Steel 316L and Stainless Steel 317L and can be utilised in industrial applications such as chemical plants, seawater pumps, seawater desalination plants, and so on. Our Duplex Steel S32205 Coils can be welded to carbon steel, alloy steels, or low carbon steels with ease.
Cities We Delivered
New York City, Los Angeles, Chicago, Houston, Phoenix, Philadelphia, San Antonio, San Diego, Dallas, San Jose, Austin, Jacksonville, Fort Worth, Columbus, Charlotte, San Francisco, Indianapolis, Seattle, Denver, Washington, Boston, El Paso, Nashville, Detroit, Oklahoma City, Portland, Las Vegas, Memphis, Louisville, Baltimore, Milwaukee, Albuquerque, Tucson, Fresno, Mesa, Sacramento, Atlanta, Kansas City, Colorado Springs, Omaha, Raleigh, Miami, Long Beach, Virginia Beach, Oakland, Minneapolis, Tulsa, Tampa, Arlington, New Orleans, Wichita, Bakersfield, Cleveland, Aurora, Anaheim, Honolulu, Santa Ana, Riverside, Corpus Christi, Lexington, Henderson, Stockton, Saint Paul, Cincinnati, St. Louis, Pittsburgh, Greensboro, Lincoln, Anchorage, Plano, Orlando, Irvine, Newark, Durham, Chula Vista, Toledo, Fort Wayne, St. Petersburg, Laredo, Jersey City, Chandler, Madison, Lubbock, Scottsdale, Reno, Buffalo, Gilbert, Glendale, North Las Vegas, Winston-Salem, Chesapeake, Norfolk, Fremont, Garland, Irving, Hialeah, Richmond, Boise, Spokane, Baton Rouge, Tacoma, San Bernardino, Modesto, Fontana, Des Moines, Moreno Valley, Santa Clarita, Fayetteville, Birmingham, Oxnard, Rochester, Port St. Lucie, Grand Rapids, Huntsville, Salt Lake City, Frisco, Yonkers, Amarillo, Glendale, Huntington Beach, McKinney, Montgomery, Augusta, Aurora, Akron, Little Rock, Tempe, Columbus, Overland Park, Grand Prairie, Tallahassee, Cape Coral, Mobile, Knoxville, Shreveport, Worcester, Ontario, Vancouver, Sioux Falls, Chattanooga, Brownsville, Fort Lauderdale, Providence, Newport News, Rancho Cucamonga, Santa Rosa, Peoria, Oceanside, Elk Grove, Salem, Pembroke Pines, Eugene, Garden Grove, Cary, Fort Collins, Corona, Springfield, Jackson, Alexandria, Hayward, Clarksville, Lakewood, Lancaster, Salinas, Palmdale, Hollywood, Springfield, Macon, Kansas City, Sunnyvale, Pomona, Killeen, Escondido, Pasadena, Naperville, Bellevue, Joliet, Murfreesboro, Midland, Rockford, Paterson, Savannah, Bridgeport, Torrance, McAllen, Syracuse, Surprise, Denton, Roseville, Thornton, Miramar, Pasadena, Mesquite, Olathe, Dayton, Carrollton, Waco, Orange, Fullerton, Charleston, West Valley City, Visalia, Hampton, Gainesville, Warren, Coral Springs, Cedar Rapids, Round Rock, Sterling Heights, Kent, Columbia, Santa Clara, New Haven, Stamford, Concord, Elizabeth, Athens, Thousand Oaks, Lafayette, Simi Valley, Topeka, Norman, Fargo, Wilmington, Abilene, Odessa, Columbia, Pearland, Victorville, Hartford, Vallejo, Allentown, Berkeley, Richardson, Arvada, Ann Arbor, Rochester, Cambridge, Sugar Land, Lansing, Evansville, College Station, Fairfield, Clearwater, Beaumont, Independence, Provo, West Jordan, Murrieta, Palm Bay, El Monte, Carlsbad, North Charleston, Temecula, Clovis, Springfield, Meridian, Westminster, Costa Mesa, High Point, Manchester, Pueblo, Lakeland, Pompano Beach, West Palm Beach, Antioch, Everett, Downey, Lowell, Centennial, Elgin, Richmond, Peoria, Broken Arrow, Miami Gardens, Billings, Jurupa Valley, Sandy Springs, Gresham, Lewisville, Hillsboro, Ventura, Greeley, Inglewood, Waterbury, League City, Santa Maria, Tyler, Davie, Lakewood, Daly City, Boulder, Allen, West Covina, Sparks, Wichita Falls, Green Bay, San Mateo, Norwalk, Rialto, Las Cruces, Chico, El Cajon, Burbank, South Bend, Renton, Vista, Davenport, Edinburg, Tuscaloosa, Carmel, Spokane Valley, San Angelo, Vacaville, Clinton, Bend, Woodbridge.
Duplex S32205 Sheets Specifications
Specification: ASTM A240 / ASME SA240
Dimension Standard: JIS, AISI, ASTM, GB, DIN, EN, etc
Width: 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length: 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness: 0.3 mm to 120 mm
Form: Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing: Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.
Chemical Composition Of Duplex S32205 Sheets
S32205 |
C |
Mn |
Si |
P |
S |
Cr |
Mo |
Ni |
N |
Fe |
0.030 max |
2.00 max |
1.00 max |
0.030 max |
0.020 max |
21 – 23 |
2.50 – 3.50 |
4.5 – 6.5 |
0.8 – 0.20 |
63.54 min |
Mechanical Properties Of Duplex S32205 Sheets
Density |
Melting point |
Tensile Strength |
Yield Strength |
Elongation |
7.805 g/cm3 |
2588-2669 Deg F |
Psi – 95000, Mpa – 655 |
Psi – 70000, Mpa – 485 |
30% |
Equivalent Grades for Duplex S32205 Sheets
Standard |
WERKSTOFF NR. |
UNS |
JIS |
BS |
GOST |
AFNOR |
EN |
Super Duplex 2205 |
1.4462 |
S32205 |
– |
– |
– |
– |
– |
Duplex S32205 Round Bar Stock
DIA | KG/M |
6 mm |
0.3 |
8 mm | 0.4 |
10 mm | 0.6 |
12 mm | 1. |
16 mm | 1.7 |
20 mm | 2.6 |
25 mm | 4. |
30 mm | 5.6 |
35 mm | 7.7 |
40 mm | 10.1 |
45 mm | 12.7 |
50 mm | 15.7 |
60 mm | 22.6 |
70 mm | 30.8 |
80 mm | 40.2 |
90 mm | 50.9 |
100 mm | 62.9 |
110 mm | 76.1 |
120 mm | 90.5 |
125 mm | 98.7 |
130 mm | 106. |
140 mm | 123. |
150 mm | 141 |
160 mm | 161 |
170 mm | 182 |
DIA | KG/M |
180 mm | 204 |
185 mm | 215 |
190 mm | 228 |
200 mm | 251 |
202 mm | 258 |
210 mm | 278 |
220 mm | 304 |
225 mm | 319 |
230 mm | 333 |
240 mm | 362 |
250 mm | 385 |
265 mm | 438 |
275 mm | 476 |
280 mm | 493 |
300 mm | 566 |
310 mm | 612 |
320 mm | 645 |
330 mm | 686 |
350 mm | 780 |
355,6 mm | 805 |
365 mm | 840 |
375 mm | 880 |
380 mm | 910 |
400 mm | 995 |
410 mm |
1058 |
Duplex S32205 Hollow Bar Stock
OD MM |
ID MM |
WEIGHT KG/M |
45 |
28 |
8,07 |
50 |
25 |
11,98 |
71 |
45 |
19,43 |
90 |
63 |
26,87 |
106 |
56 |
51,52 |
112 |
63 |
54,71 |
112 |
80 |
40,07 |
118 |
80 |
48,71 |
125 |
90 |
49,15 |
132 |
106 |
41,53 |
132 |
90 |
61,41 |
140 |
100 |
62,60 |
150 |
106 |
73,33 |
160 |
112 |
84,88 |
170 |
128 |
83,50 |
190 |
132 |
121,29 |
212 |
170 |
107,62 |
236 |
150 |
213,51 |
250 |
200 |
150,80 |
Duplex S32205 Plate Stock
MEASUREMENTS | KG/PLATE |
0,5 x 1500 x 3000 mm | 18 |
1 x 1000 x 2000 mm | 16 |
1 x 1500 x 3000 mm | 36 |
1,5 x 1500 x 3000 mm | 54 |
2 x 1000 x 2000 mm | 32 |
2 x 1500 x 3000 mm | 72 |
3 x 1500 x 3000 mm |
108 |
3 x 1500 x 6000 mm | 216 |
3 x 2000 x 6000 mm | 288 |
4 x 1500 x 3000 mm | 144 |
4 x 1500 x 6000 mm | 288 |
4 x 2000 x 6000 mm | 384 |
5 x 1500 x 3000 mm | 180 |
5 x 1500 x 6000 mm | 360 |
5 x 2000 x 6000 mm | 480 |
6 x 1500 x 3000 mm | 216 |
6 x 1500 x 6000 mm | 432 |
6 x 2000 x 6000 mm | 576 |
8 x 1500 x 3000 mm | 297 |
8 x 1500 x 6000 mm | 594 |
8 x 2000 x 6000 mm | 791 |
10 x 1500 x 3000 mm | 371 |
10 x 1500 x 6000 mm | 742 |
10 x 2000 x 6000 mm |
989 |
MEASUREMENTS | KG/PLATE |
12 x 1500 x 3000 mm | 445 |
12 x 1500 x 6000 mm | 890 |
12 x 2000 x 6000 mm | 1187 |
15 x 1500 x 3000 mm | 557 |
15 x 1500 x 6000 mm | 1113 |
15 x 2000 x 6000 mm | 1484 |
20 x 1500 x 3000 mm | 742 |
20 x 1500 x 6000 mm | 1484 |
20 x 2000 x 6000 mm | 1978 |
25 x 1500 x 3000 mm | 927 |
25 x 1500 x 6000 mm | 1854 |
25 x 2000 x 6000 mm | 2472 |
30 x 1500 x 3000 mm | 1113 |
30 x 1500 x 6000 mm | 2225 |
30 x 2000 x 6000 mm | 2967 |
35 x 2000 x 6000 mm | 3360 |
40 x 1500 x 3000 mm | 1484 |
40 x 1500 x 6000 mm | 2967 |
40 x 2000 x 6000 mm | 3956 |
45 x 2000 x 4000 mm | 2880 |
50 x 1500 x 3000 mm | 1854 |
50 x 1500 x 6000 mm | 3708 |
50 x 2000 x 6000 mm | 4944 |
60 x 1500 x 3000 mm | |
80 x 1500 x 3000 mm |
Duplex S32205 Coil Stock
1300 MM |
1500 MM |
2000 MM |
0,4 mm |
1,5 mm |
3 mm |
0,5 mm |
2 mm |
4 mm |
1 mm |
3 mm |
5 mm |
4 mm |
6 mm |
|
5 mm |
||
6 mm |
Duplex S32205 Sheets Application Industries
- Textile machinery
- Oil and gas industry
- Pulp and paper industry
- Power plants
- Energy industries
- Furniture
- Pharmaceutical processing industry
- Modern architecture
- Home appliances
- Water waste projects
- Synthetic fiber
- Heat exchanger
- Fluid piping
- Dairy and food processing
Other Types Of Duplex S32205 Sheets
UNS S32205 Hot Rolled Sheets |
Duplex Steel 2205 Sheets Manufacturer in India |
DSS S32205 2B Finish Plates in India |
Duplex Steel S32205 CR Sheet Traders |
Custom Duplex Steel S32205 HR Sheet |
Duplex Steel 2205 BA Finish Plate in Mumbai |
S32205 Duplex Steel 2B Finish Sheets |
Duplex S32205 Foils Exporter |
SAF 2205 Plain Plate |
ASTM A240 S32205 Duplex Steel Sheets |
Duplex Steel S32205 Custom Sheets |
Duplex Steel S32205 Perforated Sheets |
S32205 Duplex Steel Blank Stockists |
Duplex Steel 1.4462 BA Finish Sheet |
DSS S32205 Disc |
Duplex Steel 2205 Cut to Size Sheet |
Duplex Steel S32205 Customized Sheets |
Duplex Stainless Steel S32205 Cold Rolled |
ASME SA 240 S32205 Duplex Steel Plate |
Duplex Steel S32205 Sheet Price |
Duplex S32205 Rings Wholesaler |
ASTM A240 S32205 Chequered Plate Exporter |
Duplex Stainless Steel 2205 Strip |
Duplex Steel S32205 Circle |
Our Products
Related Products
- Alloy Steel P1 Pipes Manufacturer
- Alloy Steel P5 Pipe Manufacturer
- Alloy Steel P9 Pipes Manufacturer
- Alloy Steel P11 Pipes Manufacturer
- Alloy Steel P12 Pipes Supplier
- Alloy Steel P17 Pipe Manufacturer
- Alloy Steel P22 Pipes Manufacturer
- Alloy Steel P91 Pipes Supplier
- Alloy Steel T1 Tubes Manufacturer
- Alloy Steel T5/T5b/T5c Tubes Manufacturer
- Alloy Steel T9 Tube Supplier
- Alloy Steel T11 Tubes Supplier
- Alloy Steel T12 Tubes Manufacturer
- Alloy Steel T22 Tubes Manufacturer
- Alloy Steel T91 Tubes Supplier
- Alloy Steel T23 Tubes Manufacturer
- Alloy Steel F1 Forged Fittings Supplier
- Alloy Steel F5 Forged Fittings Manufacturer
- Alloy Steel F9 Forged Fittings Supplier
- Alloy Steel F11 Forged Fittings Supplier
- Alloy Steel F12 Forged Fittings Stockist
- Alloy Steel F22 Forged Fittings Manufacturer
- Alloy Steel F91 Forged Fittings Manufacturer
- Alloy Steel WP1 Buttweld Pipe Fittings Manufacturer
- Alloy Steel WP5 Pipe Fittings Manufacturer
Related Products
- Alloy Steel P1 Pipes Manufacturer
- Alloy Steel P5 Pipe Manufacturer
- Alloy Steel P9 Pipes Manufacturer
- Alloy Steel P11 Pipes Manufacturer
- Alloy Steel P12 Pipes Supplier
- Alloy Steel P17 Pipe Manufacturer
- Alloy Steel P22 Pipes Manufacturer
- Alloy Steel P91 Pipes Supplier
- Alloy Steel T1 Tubes Manufacturer
- Alloy Steel T5/T5b/T5c Tubes Manufacturer
- Alloy Steel T9 Tube Supplier
- Alloy Steel T11 Tubes Supplier
- Alloy Steel T12 Tubes Manufacturer
- Alloy Steel T22 Tubes Manufacturer
- Alloy Steel T91 Tubes Supplier
- Alloy Steel T23 Tubes Manufacturer
- Alloy Steel F1 Forged Fittings Supplier
- Alloy Steel F5 Forged Fittings Manufacturer
- Alloy Steel F9 Forged Fittings Supplier
- Alloy Steel F11 Forged Fittings Supplier
- Alloy Steel F12 Forged Fittings Stockist
- Alloy Steel F22 Forged Fittings Manufacturer
- Alloy Steel F91 Forged Fittings Manufacturer
- Alloy Steel WP1 Buttweld Pipe Fittings Manufacturer
- Alloy Steel WP5 Pipe Fittings Manufacturer
Related Products
- Alloy Steel P1 Pipes Manufacturer
- Alloy Steel P5 Pipe Manufacturer
- Alloy Steel P9 Pipes Manufacturer
- Alloy Steel P11 Pipes Manufacturer
- Alloy Steel P12 Pipes Supplier
- Alloy Steel P17 Pipe Manufacturer
- Alloy Steel P22 Pipes Manufacturer
- Alloy Steel P91 Pipes Supplier
- Alloy Steel T1 Tubes Manufacturer
- Alloy Steel T5/T5b/T5c Tubes Manufacturer
- Alloy Steel T9 Tube Supplier
- Alloy Steel T11 Tubes Supplier
- Alloy Steel T12 Tubes Manufacturer
- Alloy Steel T22 Tubes Manufacturer
- Alloy Steel T91 Tubes Supplier
- Alloy Steel T23 Tubes Manufacturer
- Alloy Steel F1 Forged Fittings Supplier
- Alloy Steel F5 Forged Fittings Manufacturer
- Alloy Steel F9 Forged Fittings Supplier
- Alloy Steel F11 Forged Fittings Supplier
- Alloy Steel F12 Forged Fittings Stockist
- Alloy Steel F22 Forged Fittings Manufacturer
- Alloy Steel F91 Forged Fittings Manufacturer
- Alloy Steel WP1 Buttweld Pipe Fittings Manufacturer
- Alloy Steel WP5 Pipe Fittings Manufacturer
Before You Go…
would you like a copy of our Handy Guide to leasing an industrial unit straight to your inbox?
Call Us At
Feel free to call on
+91 79774 55576
022-66394744/45
Drop Mail
For Domestic Queries:
jay@newzelindustries.com
For International Queries:
info@newzelindustries.com